Crankshaft Position Sensor

The crankshaft position sensor (CKP) is one of the most important sensors in the automotive control system. Denso is a reputable manufacturer of crankshaft position sensors, known for their quality and reliability. Their sensors are designed to provide accurate monitoring of the crankshaft’s position, ensuring optimal engine performance and efficiency

View Products
2007 saturn vue 3.5 crankshaft position sensor location

Denso Crankshaft Position Sensor

Denso offers two main types of crankshaft position sensors:

  1. Magnetic Resistant Element (MRE) Type: These sensors are highly accurate and durable, with a design that integrates the detection element and processing circuit on one chip. Reference Model number 196-1104 (90919-05047 Toyota),196-1108, 196-1112, 196-2001 (37500-PCA-004 Honda).
  2. Magnetic Pick-Up (MPU) Type: These sensors are widely used and known for their precision and reliability. Reference Model number196-6032, 196-6004, 196-4009, 196-4010.

MRE design is more sensitive and accurate than common Hall element type sensors.

Denso Crankshaft Position Sensor Models

The crankshaft position sensor denso​ makes have many variations available. To find a sensorr suitable for a specific vehicle, we have to know the car’s make, model, and year, and then find the exact Denso Crankshaft Position Sensor models.

Denso Model No. Common OEM Cross-Reference Primary Applications (Examples)
196-1003 90919-05049 / 90919-05060 Toyota Tundra, Sequoia, Land Cruiser, Lexus GX/LX (V8 engines)
196-1101 90080-19009 Toyota Highlander, Lexus ES/RX (V6 and 4-cyl applications)
196-1104 90919-05047 / 90080-19024 Toyota Camry, RAV4, Corolla, Scion tC/xB (Very high volume 4-cyl)
196-1105 90919-05051 Toyota Corolla, Matrix, Vibe (1.8L engines)
196-1108 90919-05064 Toyota/Lexus (Various models, including some hybrids)
196-1109 90919-05043 / 90919-05020 Toyota 4Runner, Tacoma, Tundra, T100 (Older truck/SUV models)
196-1117 90919-05069 Toyota RAV4, Highlander, Venza, Lexus CT/NX (Newer 4-cyl and Hybrid)
196-1120 90919-05073 Toyota Camry, RAV4, Avalon (V6 and 4-cyl models)
196-2001 37500-PCA-004 Honda Accord, Odyssey, Acura CL (V6 applications)
196-2002 37500-R40-A01 Honda Accord, CR-V (Newer 4-cylinder engines)
196-2003 37500-PNB-003 Honda CR-V, Civic Si, Acura RSX/TSX (K-Series engines)
196-2004 37500-PPA-A01 Honda Element, CR-V (Older 4-cylinder K-Series)
196-2101 37500-P72-A01 Honda Civic, Acura Integra, CR-V (B-Series and older models)
196-4002 23731-AL60A Nissan 350Z, Infiniti G35/M35/FX35 (V-Series engines)
196-4003 23731-8J10B Nissan Altima, Maxima, Murano (V6 applications)
196-4006 23731-5M000 Nissan Sentra, Altima (4-cylinder applications)
196-6017 12596860 General Motors (Various Chevrolet, GMC, and Pontiac models)
196-9102 31331754 Volvo (Older S60, V70, S80 models)
196-9103 31331765 Volvo (Newer applications, cross-references with multiple PNs)
196-6101 5033306AB Chrysler/Dodge/Jeep (Various models)

FAQ

Frequent Ask Questions about Denso Crankshaft Position Sensor

Can you drive a car with a bad crankshaft sensor?

While a car with a bad crankshaft position sensor​ can technically still be driven, it is generally not recommended.

signs of a bad crankshaft position sensor

What are the symptoms of a faulty crankshaft position sensor?

Crank sensor problem: A faulty crank position sensor can cause a range of issues in your vehicle. Here are some common crankshaft position sensor symptoms:

  1. Check Engine Light: One of the most immediate signs is the illumination of the check engine light on your dashboard.
  2. Difficulty Starting: The engine may have trouble starting or may not start at all.
  3. Engine Stalling: Your engine might stall unexpectedly, either at idle or while driving.
  4. Reduced Engine Performance: You might notice poor acceleration, reduced power, and increased fuel consumption.
  5. Rough Idling: The engine may idle inconsistently or roughly.
  6. Misfires and Vibrations: Engine misfires can lead to rough running and excessive vibrations.
  7. Erratic Timing: The engine’s timing can become erratic, affecting overall performance.
  8. Poor Fuel Economy: Inefficient fuel combustion due to improper timing can lead to decreased fuel efficiency.

How do you reset a crankshaft position sensor?

To reset a crankshaft position sensor, you typically need an OBD-II scanner or diagnostic tool. However, if you don’t have one, here’s a method you can try to reset the sensor manually:

Crank sensor problem

Method 1: Disconnecting the Battery

  1. Turn off the ignition: Ensure the vehicle is off and parked in a safe location.
  2. Locate the battery: Open the hood and find the battery.
  3. Disconnect the negative terminal: Use a wrench to loosen and remove the negative battery terminal (usually black).
  4. Wait for about 15 minutes: Allow the engine control unit (ECU) to reset.
  5. Reconnect the battery: Reattach the negative battery terminal and tighten it securely.
  6. Start the vehicle: Turn on the ignition and check if the issue is resolved.

Method 2: Using a Diagnostic Tool (Preferred Method)

  1. Connect the Scanner: Plug the OBD-II scanner into the diagnostic port of your vehicle.
  2. Enter the Menu: Navigate to the appropriate menu for resetting the crankshaft position sensor.
  3. Select Adaptation Reset: Look for an option related to adaptation or sensor adaptation reset.
  4. Follow Instructions: Follow the on-screen prompts to complete the reset process.

Similar Posts

2013 Hyundai Veloster crank position sensor

2013 hyundai veloster crankshaft position sensor

Byroot

ls replacing a crankshaft sensor easy? Replacing a crankshaft position sensor can range from straightforward to somewhat challenging, depending on your experience with car repairs and the specific vehicle make and model. Here are some factors to consider: Factors to Consider: General Steps: Difficulty Level:For someone with basic automotive repair skills, replacing a crankshaft position…

How to replace crankshaft position sensor

2007 Ford Ranger 3.0L Crankshaft Position Sensor

Byroot

Crankshaft Position Sensor Location Where is the 2007 ford ranger 3.0l crankshaft position sensor?In most cases, the crankshaft position sensor is located near the front of the engine, below the alternator. Crankshaft Position Sensor Symptoms A faulty crankshaft position sensor on a 2007 Ford Ranger 3.0L can cause several issues. Here are some common symptoms…

harley crank position sensor problems​

Crankshaft position sensor Harley Davidson

Byroot

Where is the crank sensor sensor located? Harley crank position sensor location: The crankshaft position sensor on a Harley Davidson motorcycle is usually located near the crankshaft, usually on engine block troubleshooting and replacement. It is usually necessary to remove the air filter assembly and other parts that may be obstructing the sensor to access…

Replacement crankshaft position sensor

2013 hyundai elantra crankshaft position sensor replacement cost

Byroot

How much does it cost to replace a crankshaft position sensor on a Hyundai Elantra? 2013 hyundai elantra crankshaft position sensor price: The cost to replace the 2013 Hyundai Elantra crankshaft position sensor OEM typically ranges from $175 to $210. This includes both parts and labor. The parts alone usually cost between $100 and $120,…

2003 jeep grand cherokee 4.0 crankshaft position sensor

2003 jeep grand Cherokee crank position sensor

Byroot

Where is the crank position sensor on a Jeep Grand Cherokee? 2003 jeep grand Cherokee crank position sensor location: The crank position sensor on a Jeep Grand Cherokee is typically located on the driver’s side of the engine, near the bell housing and the transmission. The exact location can vary slightly depending on the model…